Help Center Home > Apps and Integrations > Integrate with 1Password

Integrate with 1Password

Integrate your JumpCloud account with 1Password through an identity management connector. After you connect JumpCloud with 1Password, you can provision, update, and deprovision users and groups  in 1Password through your JumpCloud Administrator Portal. Leverage this integration for centralized user lifecycle management and get immediate attribute management of users bound to integrated applications.

Prerequisites

  • A JumpCloud Administrator account.
  • JumpCloud SSO Package or higher or SSO add-on feature.
  • A 1Password Business subscription or higher. 
  • Administrative access in 1Password Business.
  • A DNS record to allow for encrypted (HTTPS) communication to the SCIM bridge.
  • A deployment environment with:
    • A publicly accessible static IP address.
    • Access to port 443 and 80 to enable LetsEncrypt or a gateway with TLS termination.
    • Docker or Kubernetes.
    • 128 MB of RAM and 100 MB of available storage.
  • The 1Password SCIM integration requires users to set up a SCIM bridge server in your own environment to act as a connector between JumpCloud SCIM service and 1Password. This ensures  the encryption keys for your account are secure and only accessible to you.

Important Considerations

  • 1Password doesn’t support SAML SSO. Due to this, the 1Password application in JumpCloud will behave like a bookmark. See Connect Apps Using Bookmarks.
  • 1Password’s SCIM API is based on version 2.0 of the SCIM standard.
  • If you delete an integrated 1Password application from your Applications list, the application is removed from JumpCloud, but any previously bound users remain active in 1Password. 
  • If you deactivate the Identity Management on your 1Password application, previously bound users remain active in 1Password. No further updates will be made to user accounts via the Identity Management integration.
  • 1Password doesn’t support Sync Password functionality.
  • When a new user is provisioned using SCIM, an email is sent to the user allowing them to join the account and create their master password.
    • Their status will appear as Invited until they join.
  • If you need to update the SCIM token, you must deactivate the IdM integration, update the token, and then reactivate the integration.
  • To deactivate users, 1Password will either remove an Invited user, or mark an Active user as Suspended. 
  • Group syncing is supported.

Attribute Considerations

  • If the first name or last name is updated in JumpCloud, it will update in 1Password too. 
  • Email addresses in your 1Password account must be identical to those in your identity provider.
  • A default set of attributes are managed for users. See the Attribute Mappings section for more details.

Creating a new JumpCloud Application Integration

  1. Log in to the JumpCloud Admin Portal.
  2. Navigate to USER AUTHENTICATION > SSO Applications.
  3. Click + Add New Application.
  4. Type the name of the application in the Search field and select it.
  5. Click Next.
  6. In the Display Label, type your name for the application. Optionally, you can enter a Description, adjust the User Portal Image and choose to hide or Show in User Portal.

Note:

If this is a Bookmark Application, enter your sign-in URL in the Bookmark URL field.

  1. Click Save Application.
  2. If successful, click:
    • Configure Application and go to the next section.
    • Close to configure your new application at a later time.

Configuring the Identity Management Integration

To set up a 1Password SCIM bridge

  1. You need:
    • Administrative access in 1Password Business.
    • A DNS record to allow for encrypted (HTTPS) communication to the SCIM bridge.
    • A deployment environment with:
      • A publicly accessible static IP address.
      • Access to port 443 and 80 to enable LetsEncrypt or a gateway with TLS termination.
      • Docker or Kubernetes.
      • 128 MB of RAM and 100 MB of available storage.
  2. Follow the steps to set up and use the 1Password SCIM bridge to integrate with JumpCloud.
  3. Copy and paste the SCIM bridge URL and the Bearer Token and store these somewhere safe. You will need these to configure Identity Management in JumpCloud.

To configure JumpCloud

  1. Create a new application or select it from the Configured Applications list.
  2. Select the Identity Management tab.
  3. Click Enable management of User Groups and Group Membership in this application if you want to provision, manage and sync groups. 
  4. Click Configure.
  5. Enter the SP Base URL and the SP API Token.
    • *SP Base URL: Paste the SCIM bridge URL that you created when setting up the SCIM bridge.
    • *SP API Token: Paste the Bearer token that you generated when setting up the SCIM bridge. 
  6. Click activate. 
  7. You receive a confirmation that the Identity Management integration has been successfully verified and a Public Certificate is created.
  8. Click save.
  9. You receive a confirmation that the application was saved successfully.
  10. After the application is saved, it appears in the SSO Applications list. You can now connect users to the application in JumpCloud to provision them in 1Password. Learn how to Authorize Users to an SSO Application.

Attribute Mappings

The following table lists attributes that JumpCloud sends to 1Password. More information can be found in the Attribute Considerations section. 

Learn about JumpCloud Properties and how they work with system users in our API. 

1Password User Attributes

JumpCloud Property JumpCloud UI SCIM v2 Mapping 1Password Value
email Company Email emails: value email
email Company Email userName userName
firstname First Name name.givenName name.givenName
lastname Last Name name.familyName name.familyName

Group Attributes

JumpCloud Property JumpCloud UI Field Name SCIM v2 Mapping Application Value
name Name displayName Name

Group Management Considerations

Enabling Group Management

You must select the Enable management of User Groups and Group Membership in this application option to manage groups and group membership in the application from JumpCloud.

Group Provisioning and Syncing 
  • Empty groups are not created.
  • JumpCloud takes over management of existing groups in the application when the user group name in JumpCloud matches the name of the group in the application.
  • All user groups associated with the application in JumpCloud are synced. Syncing occurs whenever there is a membership or group change event.
  • Group renaming is supported.
  • If a user group is disassociated from the application in JumpCloud, syncing immediately stops and the group is left as-is in the application. All members of that user group are deactivated in the application unless they are associated with another active application group that is managed from JumpCloud.
Group Deletion
  • Managed groups deleted in JumpCloud are deleted in the application.
  • All members of the deleted group are deactivated in the application, unless they are associated with another active application group that is managed from JumpCloud.
Disabling Group Management
  • You can disable group and group membership management by unchecking the Enable management of User Groups and Group Membership in this application option.
  • The managed groups and group membership are left as-is in the application.
  • JumpCloud stops sending group membership information for the user, but the user’s identity will continue to be managed from JumpCloud.

1Password creates the user's display name and formatted name by combining the firstname and lastname attribute values. The display name and formatted name will be 'firstname lastname’.

Importing Users

This functionality is helpful if users have already been created in the application but have not been created in JumpCloud.

  1. Log in to the JumpCloud Admin Portal.
  2. Go to USER AUTHENTICATION > SSO Applications.
  3. Search for the application and click to open its configuration panel. 
  4. Select the Identity Management tab.
  5. Click manual import.
  6. Select the users you want to create in JumpCloud from the application from the list of users that appear. Users in the list have two import statuses:
    • New – user has not been imported.
    • Imported – user has been imported and has an account in JumpCloud.

Tip: Try using the New Users-only filter when selecting users to import. This will move all of your new users to the top of the list, making them easier to identify and select.

  1. Click import.
    • If you are importing less than 100 users, your import results will display in real time and you can continue onboarding your users. 
    • If you have more than 100 users being imported, JumpCloud will send you an email when your import is complete.
  1. You can now connect and grant users access to all their JumpCloud resources. Learn more in the Authorize Users to an Application and Connecting Users to Resources articles.

Warning: Imported users must be members of a user group bound to an application for JumpCloud to manage their identity in, and access to, the application.

SCIM Directory Insights Events

The following Directory Insights (DI) events provide visibility into failures and detailed information about the user and group data being added or updated from HR or other external solutions to JumpCloud.

Note:

Customers with no package or the Device Management Package will need to add the Directory Insights à la carte option. Directory Insights is included in all other packages.

SCIM DI Integration Events

Event Name Event Description
idm_integration_activate Logged when an IT admin attempts to activated new SCIM Identity Management integration.
idm_integration_update Logged when an IT admin attempts to update a configured and activated SCIM Identity Management integration.
idm_integration_reauth Logged when an IT admin attempts to change the credentials for an activated SCIM Identity Management integration.
idm_integration_delete Logged when an IT admin attempts to deactivate an activated SCIM Identity Management integration.

SCIM DI User Events

Event Name Event Description
user_create_provision Logged when JumpCloud tries to create a new user in service provider application.
user_update_provision Logged when JumpCloud tries to update an existing user in service provider application.
user_deprovision Logged when JumpCloud tries to change an existing user to inactive in the service provider application.
user_delete_provision Logged when JumpCloud tries to delete an existing user in service provider application.
user_lookup_provision Logged when JumpCloud encounters an issue when trying to lookup a user to determine if the user needs to be created or updated.

SCIM DI Group Events

Event Name Event Description
group_create_provision Logged when JumpCloud tries to create a new group in service provider application.
group_update_provision Logged when JumpCloud tries to update an existing group in service provider application.
group_delete_provision Logged when JumpCloud tries to delete an existing group in service provider application.

Removing the Integration

Important:

These are steps for removing the integration in JumpCloud. Consult your SP's documentation for any additional steps needed to remove the integration in the SP. Failure to remove the integration successfully for both the SP and JumpCloud may result in users losing access to the application.

To deactivate the IdM Integration

  1. Log in to the JumpCloud Admin Portal.
  2. Go to USER AUTHENTICATION > SSO Applications.
  3. Search for the application that you’d like to deactivate and click to open its details panel. 
  4. Under the company name and logo on the left hand panel, click the Deactivate IdM connection link.
  5. Click confirm. 
  6. If successful, you will receive a confirmation message.

To deactivate the SSO Integration

  1. Log in to the JumpCloud Admin Portal.
  2. Go to USER AUTHENTICATION > SSO Applications.
  3. Search for the application that you’d like to deactivate and click to open its details panel. 
  4. Select the SSO tab.
  5. Scroll to the bottom of the configuration.
  6. Click Deactivate SSO or Deactivate Bookmark. 
  7. Click save. 
  8. If successful, you will receive a confirmation message.

To delete the application

  1. Log in to the JumpCloud Admin Portal.
  2. Go to USER AUTHENTICATION > SSO Applications.
  3. Search for the application that you’d like to delete.
  4. Check the box next to the application to select it.
  5. Click Delete.
  6. Enter the number of the applications you are deleting
  7. Click Delete Application.
  8. If successful, you will see an application deletion confirmation notification.
Back to Top

List IconIn this Article

Still Have Questions?

If you cannot find an answer to your question in our FAQ, you can always contact us.

Submit a Case